Frequently Asked Questions
How long will it take to assemble?
It depends on the size. A 4'x8' section can take less than 5 minutes.
Extra precautions must be taken when used in an open-air cargo area to protect from wind and roll-overs. Tmat should never be used in an open-sided bed or with the tailgate down.
Are any tools required to assemble it?
No, Tmat requires no drilling. It can be easily assembled and installed into an enclosed, covered cargo area in minutes by connecting the panels and sliding it into place.
Extra precautions must be taken when used in an open-air cargo area to protect from wind and roll-overs. Tmat should never be used in an open-sided bed or with the tailgate down.
Do I have to make any modifications to my vehicle?
Not as long as you are installing into an enclosed and covered cargo area. Tmat just slides into place, no permanent modifications are required.
Extra precautions must be taken when used in an open-air cargo area to protect from wind and roll-overs. Tmat should never be used in an open-sided bed or with the tailgate down.
How hard is it to remove from my vehicle?
It's very simple, it slides out just like a sheet of plywood, only lighter.
Can the mat be disassembled?
Yes, just slide the dovetails apart like they went together. Disassembles in about 30 seconds.
Can I move Tmat liners from one vehicle to another?
Yes, it can easily be moved from one vehicle to another. Vehicles of different sizes may require some disassembly and re-assembly.
If it gets dirty how do I clean it?
Pull it out of your vehicle and wash it down with a hose and mild soap.
How heavy is it?
Each panel weighs less than a pound. A 4'x4' section weighs about 15 pounds.
I use my truck to haul heavy skids. How much can the mat support?
The mat can support a large amount of weight as long as it is spread out over the surface area. Even though the blockers are durable, they may not hold overtly heavy or tall objects in place. Always use straps for tall or heavy objects, or where you would normally use straps without the use of Tmat.
Can I use Tmat as a truck bed slide?
Yes, the Tmat is easy to move and slide, but the mat cannot hold weight past the tailgate without a supporting surface underneath.
Never slide Tmat past the tailgate without proper support. Many customers choose to mount plywood or another suitable surface to ensure rigidity when sliding the mat past the tailgate.
See the video below for unloading cargo that is closer to the cab.
Can I put it in only half of the truck bed?
You can if you screw it down to a 3/4" piece of plywood that covers the whole bed of the truck.
Can the mat be used in the trunk of my car or in an enclosed trailer?
Sure. Measure the dimensions of the area that needs to be lined and order the appropriate tiles and trim and follow the standard installation procedures.
Can I drive my lawn tractor, four-wheeler, etc. on it?
Yes, driving over the mat will not damage it. We drive our trucks, cars, and even tractors over it all the time. Just make sure it is always supported by a solid surface underneath.
Can I screw it down to the wood floor in my trailer?
Yes, just screw it down through the middle of the X pattern.
Does Tmat block access to the gooseneck hitch in my truck bed?
Tmat can be used with a gooseneck or 5th wheel hitch by sliding it out or removing it to access the hitch. For a DIY installation around a turn-over gooseneck ball, you must take extra precautions to protect Tmat and your cargo from wind and trailer movement. The recommended method is to secure Tmat to a plywood base for added stability.
Can I install unto a DECKED Drawer System or CargoGlide Bed Slide?
Yes. It does require drilling.
Learn more about integrating Tmat and DECKED Systems.
Can you walk on the mat?
Absolutely, just no heeled shoes. You should also remove blockers first as they can be a tripping hazard.